To Be your reliable alloy solution supplier
4J50
4J50 is a series of constant-expansion alloys that can match soft glass and ceramics with different expansion coefficients within a given temperature range by adjusting the nickel content. Its expansion coefficient and Curie point increase with the increase of nickel content. This group of alloys are widely used as sealing structural materials in the electric vacuum industry. 4J50 is a typical brand of glass-sealed alloy, which has been used for a long time in aviation factories and has stable performance. Used for making precision impedance diaphragm, wet spring and dry spring relay, precision length measurement, and sealing with corresponding soft glass. In application, the selected sealing material should match the expansion coefficient of the alloy. The grain size shall be controlled during heat treatment to ensure that the material has good deep drawing and drawing properties. When forging and rolling materials are used, the air tightness of materials shall be strictly inspected.
关键词：
所属分类：
产品附件：
关键词：
关键词：
关键词：
关键词：
关键词：
关键词：
咨询热线：
+86 21-67679028
product details
|
Brand |
4J50 |
|
Similar Brands |
Ni50 FeNi52 |
|
Corresponding Standards |
GB /T 15018-1994《Precision alloy grade》 GB /T 37793-2019《Precision alloy grade》 |
|
Classification |
Alloy steel |
|
Label |
Expansion alloy |
|
Explain |
4J50 is a series of constant-expansion alloys that can match soft glass and ceramics with different expansion coefficients within a given temperature range by adjusting the nickel content. Its expansion coefficient and Curie point increase with the increase of nickel content. This group of alloys are widely used as sealing structural materials in the electric vacuum industry. 4J50 is a typical brand of glass-sealed alloy, which has been used for a long time in aviation factories and has stable performance. Used for making precision impedance diaphragm, wet spring and dry spring relay, precision length measurement, and sealing with corresponding soft glass. In application, the selected sealing material should match the expansion coefficient of the alloy. The grain size shall be controlled during heat treatment to ensure that the material has good deep drawing and drawing properties. When forging and rolling materials are used, the air tightness of materials shall be strictly inspected. |
|
Density |
8.21g/cm3 |
Chemical composition：%
| Element | Fe | C | Si | Mn | P | S | Ni | Al |
| Minimum value | Allowance | - | - | - | - | - | 49.5 | - |
| Maximum | 0.05 | 0.3 | 0.8 | 0.02 | 0.02 | 50.5 | 0.1 |
Note: The above information is for reference only. Some elements in different standards and specifications may be different.
The information of the above materials is rough description, and any deviation may be used for reference only
*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible
Contact us
Contact us immediately if you need any assistance
Tel：+86 21-57670337 Manager:13601862602
Address：Plant 9, No. 212, Jiangtian East Road, Songjiang District, Shanghai, China