To Be your reliable alloy solution supplier
NS336
NS336 is an austenitic high temperature corrosion resistant alloy containing Ni-Cr-Mo-Nb elements. NS336 alloy with low C content (C ≤ 0.03%) has excellent corrosion resistance in a variety of corrosive media, usually in the softening and annealing state, and is applicable to water-soluble corrosive media below 593 ℃, and is applicable to the temperature range of - 196 to 450 ℃ according to ASME code. Due to the low C content and stabilization heat treatment, the alloy shows only very low sensitization tendency even after 50 hours at the temperature range of 650-900 ℃. ☞ Excellent resistance to spot corrosion and intergranular corrosion ☞ Excellent resistance to chloride ion stress corrosion cracking ☞ Excellent corrosion resistance in nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid and other inorganic acids ☞ Good corrosion resistance in alkali solution and organic acid ☞ Good mechanical properties Scope of application: chemical pen, marine engineering equipment and environmental protection equipment, etc. ☞ High concentration phosphoric acid production equipment ☞ Nuclear waste reprocessing equipment ☞ High-sulfur oil and gas pipeline ☞ Tubing sleeve and piping system on oil production equipment ☞ Flue gas purifier
关键词：
所属分类：
产品附件：
关键词：
关键词：
关键词：
关键词：
关键词：
关键词：
咨询热线：
+86 21-67679028
product details
|
Brand |
NS336 |
|
Similar brands |
NS3306 0Cr20Ni65Mo10Nb4 H 03306 H 06625 Inconel 625 N 06625 |
|
Correspondingstandards |
YB /T 5354-2012 《Cold-rolled corrosion-resistant alloy sheet》 YB /T 5353-2012《Corrosion resistant alloy hot rolled plate》 YB /T 5355-2012《Cold-rolled strip of corrosion-resistant alloy》 GB/T 15007-2017 《Corrosion resistant alloy grade》 |
|
Classification |
Special alloy steel |
|
Performance |
Corrosion resistance |
|
Label |
Nickel-base wrought alloy Solution strengthening |
|
Explain |
NS336 is an austenitic high temperature corrosion resistant alloy containing Ni-Cr-Mo-Nb elements. NS336 alloy with low C content (C ≤ 0.03%) has excellent corrosion resistance in a variety of corrosive media, usually in the softening and annealing state, and is applicable to water-soluble corrosive media below 593 ℃, and is applicable to the temperature range of - 196 to 450 ℃ according to ASME code. Due to the low C content and stabilization heat treatment, the alloy shows only very low sensitization tendency even after 50 hours at the temperature range of 650-900 ℃. ☞ Excellent resistance to spot corrosion and intergranular corrosion Scope of application: chemical pen, marine engineering equipment and environmental protection equipment, etc. |
|
Density |
8.44g/cm3 |
Chemical composition:%
| Element | Cr | Ni | Mo | Nb | Fe | Co | Al | Ti | C | Mn | Si | P | S |
| Min. | 20.0 | 58 | 8.0 | 3.15 | - | - | - | - | - | - | - | - | - |
| Max | 23.0 | - | 10.0 | 4.15 | 5 | 1.0 | 0.4 | 0.4 | 0.10 | 0.5 | 0.5 | 0.015 | 0.015 |
Note: The above information is for reference only. Some elements in different standards and specifications may be different.
The information of the above materials is rough description, and any deviation may be used for reference only
*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible
Contact us
Contact us immediately if you need any assistance
Tel：+86 21-57670337 Manager:13601862602
Address：Plant 9, No. 212, Jiangtian East Road, Songjiang District, Shanghai, China